Printer Repair Experts

• Showing all info on the printer such as ink level, ink counter number of cleaning, cartridge replacement and more.
• Print test feature to test nozzle on the cartridge.
• Cleaning and deep cleaning feature to clean head cartridge and cleaning the rollers.
• Changing the delay value for drying.
• Set the printer model manually.
• Reading and reset EEPROM printer.
• Reset counter and reset ink level on the color and black cartridges.

Ink Level – shows the level ink:

• BK – black cartridge.
• CY – Cyan cartridge.
• MG – Magenta cartridge.
• YL – Yellow cartridge.
• WM – Waste ink counter status.
• WP – “additional” waste ink counter status.

Port Name – displays the port where the printer installed.
Port S / N – shows the serial number of the printer port.
Power – shows the number of:

• ON – inclusions printer.
• OFF – to turn off the printer.

Cartridge Info – Displays information status of:

• BK – black cartridge.
• CL – colored cartridge.

Head Parking – displays the number of parking.
Head Cleaning – shows the number how many time the cartridge cleaned.
Head Deep Cleaning – displays the number of deep cleaning Printer cartridge.
Cartridge Replacement – shows the number of cartridge replacements:
BK – black cartridge.
CL – colored cartridge.

Download iPTool version 1.1.3

• Open system configuration utility by click start-run then type msconfig
• Go to Startup Tab then disable HPWuSchd2 and HP Digital Imaging
  
• Click apply then Ok
• You must restart the computer to take effect

1. Unplug power and USB.
2. Open door and hold power button.
3. Connect power.
4. Close door, then release power button.

1. Reconnect the printer cable.
2. Download
   General Tools software Resetter for canon Pixma iP 1500
   General Tools software Resetter for Canon PIXMA iP1000 Printers
3. Run the Software Resetter and select (USB PORT)
4. Choose SET DESTINATION 1 And it should be reset.

1. Download software for Canon iP1200, iP1600, 2200 Printers.DOWNLOAD Service Tool Software for Canon Pixma Printer iP1200, iP1600, iP2200
2. Unzip downloaded file by WinZip, 7Zip, Izarc, etc
3. Run GeneralTool.exe
4. Select the connected USB port number from USB PORT
5. Click LOCK RELEASE, and select the applicable model name in SET DESTINATION
6. In CLEAR WASTE INK COUNTER, select MAIN or PLATEN. The selected waste ink counter will be reset. MAIN resets the main waste ink counter, PLATEN resets the platen waste ink counter.

1. Turn off Canon Pixma iP1700, iP1300 Printers
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the Canon Pixma iP1700, iP1300 Printers should turn off, if not, press the Power button once more.
8. Your Canon Pixma iP1700, iP1300 Printers should respond as normal

1. Download Software Resetter for Canon Printers iP1300 dan iP1700 Software Resetter for Canon Pixma iP1300, iP1700
2. Ekstrak/Unrar/Unzip the Software
3. run GeneralTool.exe
4. Select  USB Port where the canon ip1300 or canon ip1700 installed.
5. CLick Lock Release button
6. Select EEPROM CLEAR
7. Click Test Pattern 1 button
8. Your Canon Pixma iP1700, iP1300 Printers should respond as normal.

1. With the printer plugged in and powered off, press and hold the Resume/Cancel button, then press and hold the Power button. (DO NOT release the buttons. The LED light should be green to indicate that a function is selectable.).
2. While holding the Power button, release the Resume/Cancel button. (DO NOT release the Power button.).
3. While holding the Power button, press the Resume/Cancel button 2 times, and then release both the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the LED lights alternately in orange and green, starting with orange.).
4. When the LED light is green, press the Resume/Cancel button 4 times. (Each time the Resume/Cancel button is pressed, the LED lights alternately in orange and green, starting with orange.).
5. Press the Power button. The LED lights in green, and the reset is performed. (When the operation completes, the printer returns to the menu selection mode automatically.).
6. Press the power button to exit service mode.

1. Turn off the Printers.
2. Hold Resume button click POWER.
3. Hold button RESUME, release POWER
4. Then press the button again twice RESUME.
5. Release all the buttons.
6. Indicator led in green and stay green.
7. Click the button 4 times RESUME, if you want to make another transaction. :Look at the listed below:
   1 led- Orange – Service test print 1 times – Orange – Service test print
   2 led – Green – EEPROM information print 2 times – Green – EEPROM information print
   3 led – Orange – EEPROM initialization 3 times – Orange – EEPROM initialization
   4 led – Green – Waste ink counter setting 4 time – Green – Waste ink counter setting
   5 led – Orange – Destination setting (Press Power > Press Resume 3x) 5 times – Orange – Destination setting (Press Power> Press Resume 3x)
   6 led – Green – Print head deep cleaning 6 times – Green – Print head deep cleaning
   11-13 led – Orange, Green, Orange – Return to menu selection
   14 led – Green – Left margin correction 14 times – Green – Left margin correction
8. Turn off the printer POWER button.