Fake or Not? Resetter Canon MP198



I get info download link resetter for Canon MP198 when there is a visitor leave a comment on this blog. But I don’t know this software resetter work or not because I don’t have Canon MP198 printer to try this software, this software can be used on this canon printer version or not.

If seen the screenshot of the software resetter I thinks this software only work windows XP and older windows version and can not be used in windows vista or windows 7. 
Here the screenshot of the software resetter when I try to run this software:

This Canon MP189 resetter can be download from this link: http://www.4shared.com/file/187276726/d145629d/Resetter_Canon_MP198.html

Update: A few users leave a comment in this topic, this software resetter work but only with black cartridges and other user say it work.


Read More Add your Comment 1 comments


Repair or Reset Epson TX121, T13, T1100



After wait for a long time, finally resetter Epson T13, TX121 and T1100 available on internet. I found the resetter Epson T1100 on indoreset whereas resetter Epson T13 and TX121 on mediafire uploaded by OrTHoTaMiNe.

I’ve tried to run all software resetter on my computer and all software resetter not crash with antivirus installed on my computer (I use AVG) except resetter Epson T13. AVG antivirus detected Epson T23 resetter as Virus. Maybe it caused this software has cracked but I think it not problem, you can disable the antivirus protection on your computer when you want to use this software to reset your Epson printer.

Here the screenshot software resetter Epson TX121 and T1100

Whereas software resetter Epson T13 was detected as virus by AVG, here the screenshot:


Download link software reseter Epson T13, TX121 and T1100:
Download Resetter Epson T13
Download Resetter Epson TX121 also work on Epson ME320
Download Resetter Epson T1100


Read More Add your Comment 0 comments


Repair or Reset Epson T50 and T60 without error 21000068



Get an error 21000068 when repair or resetting your Epson T50 or Epson T60 and not see  any solution to prevent the problem. Why not try this tips, but reset this method not recommended for beginner user and you must understand what you are doing. These tips from Jagdish Rathore (India) and I have been granted permission to publish on this blog. He also has been publishing this reset method on his blog on: http://www.epsonservice.blog.com. If you do not have any knowledge about PCB and electronics, I recommend don’t try this reset methode.

Here the reset method from Jagdish Rathore:
  1. Turn off printer and open printer.
  2. Open your Epson main PCB board.  You can view an 8 pin CMOS IC.  That is Epson waste ink counter IC and found on all Epson Printer.
  3. You can reset your printer without any resetter by following these ways.
  4. Soldering pin no 1,2,3,4 by wire  as show in PICTURE and now turn on printer for ”20 second”
  5. After 20 second turn off printer  and remove soldering wire from pin no. 1,2,3,4 ( back in original condition)
  6. Now turn on your printer
  7. And now your printer will be RESET
Note: This method is not recommended for beginners so you have to understand what you are doing. All problem caused by this tutorials is not our responsibility. Use this tutorial as your own risk.


Read More Add your Comment 0 comments


Repair or reset Canon MP198, MP258, MP276, MP496, MP558, MP568, and MP648



To everyone who required resetter for Canon MP198, MP258, MP276, MP496, MP558, MP568, and MP648 to reset ink counter on these canon printer model, I found how to reset these canon printers model on PrinterExperts.Blogspot.com. Canon MP198, MP258, MP276, MP496, MP558, MP568, and MP648 is canon all in one printer verison that designed for home and small office.

I don’t know this reset method work or not on canon MP198, MP258, MP276, MP496, MP558, MP568, and MP648 because I don’t have this printer model to try this reset method.

Ready to reset your printer, follow the following steps:
All these steps must be done to reset your Canon MP198, MP258, MP276, MP496, MP558, MP568, and MP648 printer.
A. Entering into service mode
  1. Turn off the printer off is the printer power on. And remove the printer USB cable from your computer..
  2. While the printer is OFF, press and hold the Start/Stop button on the some other canon printers model press Resume/Cancel button.
  3. While still holding Start/Stop button or Resume/Cancel button, press and hold the POWER button.
  4. When the POWER LED (green light) lit, release the Start/Stop or resume/cancel button (still holding the POWER button).
  5. Still holding the power button,   Press the Start/Stop button or resume/cancel button TWICE then Release the POWER button. Wait until LCD printer to display 0 (zero) number
  6. After the display is 0, attach the printer UDB cable to your computer, its will detected new device installed (its normal), now go to resetting steps

B. Resetting Ink counter on the Printer
  1. Run “service_tool 1050.exe”. you can download the service tool software from this link: ServiceTool_1050.zip
  2. service tool 1050
  3. Confirm detected USB-port numbers on USB port column.
  4. Click “Main button” on Clear ink counter section. Make sure there are papers in the paper feed because the printer will print after the process is complete.
  5. Click “platen button” on the “Clear ink counter” section. The printer will print again.
  6. Turn off the printer and then turn the printer on. You printer is ready for use.


Read More Add your Comment 1 comments


Resolve the problem after resetting the Canon Pixma iP1700



Resolve the problem after resetting the Canon Pixma IP 1700, I find two problem often happened when resetting the printer. First case, My Canon Pixma IP 1700 becoming Canon Pixma IP1300 after resetting the eeprom, second case, cartridge not recognize after resetting the counter then the led blinking 5X orange and 1X green..

1. My Canon pixma IP 1700 becoming IP1300
My Canon Pixma IP1700 becoming canon Pixma IP1300, this problem happened after resetting the eeprom of Canon IP1700 using IPtool. The solutions for this problem :
  • Install driver for canon IP1300, you can download the driver in the canon website.
  • Now run IPtool software, auto recognize as Canon Pixma IP1300
  • In the change model set the printer to IP1700.
  • In the EEPROM Operations click reset button. Turn off the printer and turn on again, the problem solved now your Canon printer becoming Canon Pixma IP 1700 again.
2. Blinking orange 5x and green 1x and the color/black cartridge not recognized
This problem appear after several times reset ink level the cartridge. If this reset methode does not work to solve the problem. I get this solution after several times try resetting using various combinations button. Solutions for the problem are:
  • Start with printer off
  • Hold down Resume button and press Power button.
  • Keep holding down Power button and press Resume 2 times, then press and hold the resume button, release power button.
  • Green lights will flash and then stop blinking (Keep hold the resume button).
  • When green lights are solid, release resume button and press again the Resume button 4 times.
  • Don’t switch of the printer (because if your trun off and turn on again the printer the problem still appear), Now reset the counter and EEPROM canon IP1700 using IPTool software (recommended).
  • Turn off and turn on again the printer, the printer should respond as normal. In my Canon IP1700 problem solved.


Read More Add your Comment 0 comments


Repair or Reset Counter Canon Pixma MP190



Repair or Reset Counter Canon Pixma MP190. This article is to answer many questions about reset method Printer Canon Pixma MP190 from this blgo readers. And I found this method but I’m not tried  this reset method, I just share this manual reset in this blog. You can try this reset method to reset waste ink counter in your Canon Pixma MP190.

Canon Pixma MP190 all-in-one is compact ans styles photo printer with printing, copying and scanning features. This printer using advance copy technology for best copying result. Price of the Canon MP190 in the market is about $40.

Waste Ink Counter Reset for Canon MP190:
  1. Turn on the printer then press Menu-Copy-Scan-Copy-Copy to enter enter into SERVICE MODE.
  2. After enter into service mode, Select TEST MODE.
  3. Select [8] PRINTER TEST in TEST MODE.
  4. Select 3. [EEPROM CLEAR].
  5. Select 0. [INK COUNT] to reset the ink counter in the printer.
  6. Press the [Set] key.
  7. Press the [Stop/Reset] key (returning to the state of 3), and then press the [ON/OFF] key
After reset manually you can use software resetter to reset the printer. The software can download from this link: Download software resetter Canon Pixma MP190


Read More Add your Comment 1 comments


How to disable Low Ink Warning in The Hp Deskjet 2466



A few days ago my printer Deskjet 2466 always show low ink warning and this message very disturbing my work. After searching the service for my HP printer that running  in my computer, I found 2 service running for this HP printer. I try to disable the service and it success remove warning message in my computer.

Besides tried in my computer this method on my computer that using HP deskjet 2466, I also tried on other computer that installed that using HP deskjet 2180 all in one printer and it working 100%. The both printer using cartridges HP21 and HP22. I thinks this methods also can be used to remove low ink message on other printer that using the same HP cartridge types.

Here the Methods to Disable Low Ink Warning in the HP Deskjet 2566:
  1. Open system configuration utility by click start-run then type msconfig
  2. Go to Startup Tab then disable HPWuSchd2 and HP Digital Imaging
  3. Click apply then Ok
  4. You must restart the computer to take effect
The above methods only for disable low ink warning, not reset the ink level. To reset ink level on the HP printer models mentioned above you use this methods: Ink Levels Reset for HP Cartridges HP21, HP27, HP56, HP58 and How to Reset Ink Levels for HP Cartridges HP22, HP28, HP57. Good luck.


Read More Add your Comment 1 comments


Repair or reset for HP Cartridges HP22, HP28, HP57



Ink level Reset method for HP Cartridges HP22, HP28 and HP57 almost similar with Ink Levels Reset for HP Cartridges HP21, HP27, HP56 and HP58. HP22, HP28 and HP57 is color cartridges HP printers. This manual reset methode to solve low ink warning on this hp cartridges. This ink levels reset method has tested and also work on my HP printer HP D2466.  If this ink levels reset methode does not work on your HP printer, you can try more than 1 times in your hp printer.

Here Ink levels reset methode for HP Cartridges HP22, HP28 and HP57 (On most models):
  1. Remove cartridge from your printer.
  2. Place a piece of tape over the top left contact as shown in red on the picture to the right.
  3. With the tape covering the contact place cartridge back into printer.
  4. The printer will perform and alignment page. (Some newer models no longer print alignment pages. If printer runs through a series of priming routines and stops for 20 seconds continue through with next step)
  5. Once an alignment page has been printed remove cartridge from printer.
  6. Place a piece of tape over the second contact shown in red.
  7. Place cartridge into printer with both pieces of tape. (One covering the first contact and one cover the second contact.)
  8. Printer will print another alignment page. (Some newer models no longer print alignment pages. If printer runs through a series of priming routines and stops for 20 seconds continue through with next step.)
  9. Once the second alignment page has been printed remove cartridge from printer.
  10. Remove tape pieces from cartridge contacts
  11. Make sure there is no residual adhesive on cartridge contacts.
  12. Place cartridge into printer. Cartridge should now read full.
Notes: It is very important that there is no residual adhesive on the cartridge contact point. This will make reading the cartridge difficult.


Read More Add your Comment 1 comments


Repair or reset for HP Cartridges HP21, HP27, HP56, HP58



This reset methods be used to reset ink levels on HP printer that using cartridges HP21, HP27, HP56 and HP58 (On most models). I have tested this reset methods on HP Deskjet 2466 and work perfectly but in other HP printer types  this reset methods does not work.

To do this reset methods no software resetter required, just require  only a piece of tape. If this reset method does not work on your printer you will need to repeat this process. If you have to reattempt the reset turn your computer off before doing so. Leave computer off during the reset process or disconnected the printer from computer.

Here the Ink levels reset methode for HP cartridges HP21, hp27, hp56 and HP58:
  1. Remove cartridge from your printer.
  2. Place a piece of tape over the top left contact as shown in red on the picture to the right.
  3. With the tape covering the contact place cartridge back into printer.
  4. The printer will perform and alignment page. (Some newer models no longer print alignment pages. If printer runs through a series of priming routines and stops for 20 seconds continue through with next step.)
  5. Once an alignment page has been printed remove cartridge from printer.
  6. Place a piece of tape over the second contact shown in red.
  7. Place cartridge into printer with both pieces of tape. (One covering the first contact and one cover the second contact.)
  8. Printer will print another alignment page. (Some newer models no longer print alignment pages. If printer runs through a series of priming routines and stops for 20 seconds continue through with next step.)
  9. Once the second alignment page has been printed remove cartridge from printer.
  10. Remove tape pieces from cartridge contacts Make sure there is no residual adhesive on cartridge contacts.
  11. Place cartridge into printer. Cartridge should now read full.

Additional Notes: As stated above it is very important that there is no residual adhesive on the cartridge contact point. This will make reading the cartridge difficult.


Read More Add your Comment 1 comments


Repair or reset Canon PIXMA MP240 printer



How do you repair or reset Canon PIXMA MP240 printer after refilling ink cartridges? I refilled the Canon PIXMA MP240 cartridges using a refill kit. Printer won't recognize them anymore. Hours of Googling and pressing random buttons resulted in nothing useful. Any idea if it's even possible to "convince" a Canon PIXMA MP240 printer to take refilled cartridges? If so, how?

Repair or reset Canon PIXMA MP240 printer:
  1. Disconnect the power cable to the printer.
  2. Hold down the On/Off button.
  3. Reconnect thew power cable.
  4. With the power button still down, press the Stop/Reset button twice.
  5. Release the On/Off button.
  6. The printer is now in the factory mode (wait until idle is displayed)
  7. Press the right arrow button (next to the OK button) repeatedly until Shipping Mode 3 is displayed.
  8. Press the OK button.
  9. Wait until "Without Cleaning" is displayed and then press the Stop/Reset button once.
  10. A test page should print, but if not, don't worry.
  11. Open the cover. The cartridge should position themselves at the far left-(the cartridge removal location.)
  12. Disconnect the power cable.
  13. Remove both cartridges.
  14. Close the cover.
  15. Reconnect the power cable.
  16. Press the On/Off button.
  17. Wait until a Replace Cartridges message is displayed. Now insert the cartridges.
  18. Close cover and wait until the printer is in the normal mode and displays the normal start menu (i.e. Copy)


Read More Add your Comment 0 comments


Repair Blink HP Deskjet D2566, 2466, 3535, 3420, 3920



Repair Blink HP Deskjet
HP Deskjet 2566 printer is a printer with the price is quite cheap and reliable. However, in my opinion, the ink storage capacity is smaller than previous versions, D2466 and other. Same with other printers, HP Deskjet D2566 printer, chances are, you will find a blink or flashing LED indicator light on and the printer cannot be used. Are HP printers also need reset and how to cope with blink on HP D2566?

The printer requires a reset either manually or software. This event will often be found on the Canon and Epson. As for the printer includes the HP Deskjet D2566 Printer and HP’s other types that do not require a reset, because there is no protection against the board or this HP printer cartridges. Besides the HP D2566, but it actually applies also for the HP Deskjet 3535, 3420, 3920, 2466 which had the power light blink blinking or ink continues. And it does not mean we have to reset the HP Deskjet printer. Blink on HP D2566, 3535, 3420, 3920, 2466 This is a sign that one of the HP deskjet printer cartridge chip is damaged and must be replaced with a new cartridge.

How to overcome the blink HP Deskjet D2566, 2466, 3535, 3420, 3920:
  • Suppose that you suspect is defective color cartridge. Take the black cartridge and allow only the color cartridge installed.
           pressing the button on  
  • observe the power indicator light or ink, if the HP Deskjet D2566 Printer, 3535, 3420, 3920, 2466 you still blink means the color cartridge is damaged.
  • If the power indicator light or flame full of ink, it means that your HP Deskjet printer cartridge color you are still good.
  • Take the color cartridge and reinsert the black cartridge. Means that only the black cartridge installed in the HP deskjet printer.
  • Then turn on your HP Deskjet printer.
  • Make observations on the power indicator light or ink, if the printer is HP Deskjet D2566, 3535, 3420, 3920, 2466 you still blink again means your black cartridge is damaged.
  • If the power indicator light or ink full flame, meaning a black cartridge HP DeskJet printer you are still good.
  • In conclusion,

HP Deskjet printers blink is caused by a defective cartridge is not for requesting reset. If your HP Deskjet printer cartridge is damaged, you can try cleaning the first pin in the cartridge with a pencil eraser. If it still damaged or blink, it means you already need to replace it.


Read More Add your Comment 2 comments


Free Canon IP1800 General Tool



To solve the problem on Canon Printer IP1800 please download Canon IP1800 General Tool for Free
Free Download Canon IP1800 General Tool


Read More Add your Comment 1 comments


Free resetter Canon IP1700



To solve the problem on Canon Printer IP1700 please download software resetter Canon IP1700 for Free
Free Download Resetter Canon IP1700

Canon IP1700 Ink waste resetter
http://www.divshare.com/download/2612818-f02

Canon IP1700 Ink waste resetter
http://www.divshare.com/download/2612818-f02


Read More Add your Comment 0 comments


How to repair or Reset Epson TX110 / TX111



Use the software resetter for Epson TX110 printer repair / TX111 (Adjustment program for Printer Epson TX110 / TX111)
Reset Epson TX110 / TX111



Read More Add your Comment 0 comments


Download Resetter Epson L200



Download Resetter Epson L200
Epson L200


Read More Add your Comment 0 comments


Repair or resetter Epson T50



Repair or Resetter Epson T50


Read More Add your Comment 0 comments


Error Code Canon MP150/MP160 and How to clear E27 Code MP150/MP160



MP150/MP160
Error Code Canon MP150/MP160
E9 The connected digital camera / video camera does not support Camera
Direct Printing
E14 The Ink cartridges whose destination are wrong
E15 Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 Failed to scan head alignment sheet
E22 Carriage error
E23 Paper feed error
E24 Purge unit error
E25 ASF(cam) sensor error
E26 Internal temperature rise error
E27 Waste ink absorber full or platen waste ink absorber full

E28 Ink cartridge temperature rise error -
E29 EEPROM error
E33 Paper feed position error
E35 15 USB Host VBUD overcurrent error - USB
E37 17 Abnormal motor driver error
E40 20 Other hardware error
E42 22 Scanner error

How to clear E27 Code
  • With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button.
  • When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
  • When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a service mode. (Waiting for menu selection)
  • When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in orange and green, starting with orange.)note: press 4 times for waste ink counter reset.
The number of the Reset button pressing LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print (auto teste)
2 times Green EEPROM print (dados da EEPROM)
3 times Orange EEPROM reset (EEPROM reset)
4 times Green Waste ink counter reset (Absorvente reset)
  • Turn off the printer.( it must be turn off) then turn it on again.


Read More Add your Comment 0 comments


Repair or reset Epson TX102 / TX103



How to repair or reset Epson TX102 / TX103?


Read More Add your Comment 0 comments


Repair or reset procedure for EPSON RX500



Repair or reset procedure for EPSON RX500
Protection counter is the counter for wasted ink; it says to printer how much space it has in special tray where all wasted ink are going during cleaning procedures. With time it became full (printer just won't print in this case) and absorbtion padding must be replaced. After replacing the padding You must reset the protection counter to zero in order to continue ordinary printing.

Repair or reset procedure for EPSON RX500:
Press all following buttons :Power, Load/Eject, Stop, B&W, Color,
after this printer turns on and you'll see "Init eeprom" on printer screen.
Press Color button to clear protection counter.

Alternate. Hold down "clear + setup + on"
Continue to hold the buttons until the printer had powered on, then off again, then back on. Once you noticed that the LCD had flashed a blank screen, let go of the 3 keys. In the LCD window you now have access to 3 options using the select keys.

Look for an abbreviation resembling "ink pad level" . Here is where Held down the clear button for around 10 seconds. LCD must read "Press Power to Reset."


Read More Add your Comment 0 comments


Repair or reset Canon printers(MP145,MP150,MP160,MP198,MX338)



If you have a Canon printer and encounter “Waste Ink Absorber is full” here’s a solution for you without going to Canon Service Center for servicing that might cost you a price of a new printer. Canon printers has a certain internal counter suggests that the ink absorber may be full, and you can DIY . I have tested all and it is working.

Here’s for Canon MP145 ,MP150 and MP160

  1. With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button.
  2. When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
  3. When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a service mode. (Waiting for menu selection)
  4. When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in orange and green, starting with orange.)note: press 4 times for waste ink counter reset.
  5. Press the Power button to save the settings.
  6. Unplug cable power. (for MP145 / MP150) or Turn Off Power. (for MP160)
  7. If it doesn’t work repeat the steps again.
The number of the Reset button pressing LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset
After manual reset, use this software to permanently remain the resets. Download


Here’s the tutorial Manual Reset for Canon MP198

  1. Start with printer OFF and usb cable disconnected from pc.
  2. Hold down STOP/RESET and then hold down POWER at the same time.
  3. Release STOP/RESET (don’t let go of the power just yet)
  4. Press RESUME twice, then release POWER and wait until the lcd panel indicates (0)
  5. Now connect your usb cable to pc and a message shows new hardware detected, just ignore it.
  6. Download the reset file here.
  7. Run the service tool, press main on Clear Ink Counter, a test print will print and press platern again.
  8. Power off and on again, now you can continue to print as normal. If it doesn’t, repeat the steps again.

Here’s for the Canon MX338
  1. Turn off the printer without pulling the power cords.
  2. Hold down STOP/RESET button and press Power button.
  3. Keep holding down Power button and let STOP/RESET button go.
  4. Then Press STOP/RESET button twice then let BOTH buttons go.
  5. You will notice that the Alternate Blinking error is gone, this means that the printer is in Service Mode state.
  6. After this is done download the resetter, extract it and double click “MX338.exe”
  7. Click Reload Button and you will get a new USB port.
  8. Load some papers in your printer and press the “Main” Button once, wait until the printing is done.
  9. Then press “EEPROM Clear” button to clear EEPROM.
  10. Then press EEPROM button and the printer will print some text.
  11. Then power off the printer(sometimes you have to press twice the power button to turn off) and turn on again.
  12. Download the resetter here.


Read More Add your Comment 0 comments


 

Our Partners

© 2010 Printer Repair Experts All Rights Reserved Thesis WordPress Theme Converted into Blogger Template by Hack Tutors.info