Fake or Not? Resetter Canon MP198



I get info download link resetter for Canon MP198 when there is a visitor leave a comment on this blog. But I don’t know this software resetter work or not because I don’t have Canon MP198 printer to try this software, this software can be used on this canon printer version or not.

If seen the screenshot of the software resetter I thinks this software only work windows XP and older windows version and can not be used in windows vista or windows 7. 
Here the screenshot of the software resetter when I try to run this software:

This Canon MP189 resetter can be download from this link: http://www.4shared.com/file/187276726/d145629d/Resetter_Canon_MP198.html

Update: A few users leave a comment in this topic, this software resetter work but only with black cartridges and other user say it work.


Read More Add your Comment 1 comments


Repair or reset Canon MP198, MP258, MP276, MP496, MP558, MP568, and MP648



To everyone who required resetter for Canon MP198, MP258, MP276, MP496, MP558, MP568, and MP648 to reset ink counter on these canon printer model, I found how to reset these canon printers model on PrinterExperts.Blogspot.com. Canon MP198, MP258, MP276, MP496, MP558, MP568, and MP648 is canon all in one printer verison that designed for home and small office.

I don’t know this reset method work or not on canon MP198, MP258, MP276, MP496, MP558, MP568, and MP648 because I don’t have this printer model to try this reset method.

Ready to reset your printer, follow the following steps:
All these steps must be done to reset your Canon MP198, MP258, MP276, MP496, MP558, MP568, and MP648 printer.
A. Entering into service mode
  1. Turn off the printer off is the printer power on. And remove the printer USB cable from your computer..
  2. While the printer is OFF, press and hold the Start/Stop button on the some other canon printers model press Resume/Cancel button.
  3. While still holding Start/Stop button or Resume/Cancel button, press and hold the POWER button.
  4. When the POWER LED (green light) lit, release the Start/Stop or resume/cancel button (still holding the POWER button).
  5. Still holding the power button,   Press the Start/Stop button or resume/cancel button TWICE then Release the POWER button. Wait until LCD printer to display 0 (zero) number
  6. After the display is 0, attach the printer UDB cable to your computer, its will detected new device installed (its normal), now go to resetting steps

B. Resetting Ink counter on the Printer
  1. Run “service_tool 1050.exe”. you can download the service tool software from this link: ServiceTool_1050.zip
  2. service tool 1050
  3. Confirm detected USB-port numbers on USB port column.
  4. Click “Main button” on Clear ink counter section. Make sure there are papers in the paper feed because the printer will print after the process is complete.
  5. Click “platen button” on the “Clear ink counter” section. The printer will print again.
  6. Turn off the printer and then turn the printer on. You printer is ready for use.


Read More Add your Comment 1 comments


Resolve the problem after resetting the Canon Pixma iP1700



Resolve the problem after resetting the Canon Pixma IP 1700, I find two problem often happened when resetting the printer. First case, My Canon Pixma IP 1700 becoming Canon Pixma IP1300 after resetting the eeprom, second case, cartridge not recognize after resetting the counter then the led blinking 5X orange and 1X green..

1. My Canon pixma IP 1700 becoming IP1300
My Canon Pixma IP1700 becoming canon Pixma IP1300, this problem happened after resetting the eeprom of Canon IP1700 using IPtool. The solutions for this problem :
  • Install driver for canon IP1300, you can download the driver in the canon website.
  • Now run IPtool software, auto recognize as Canon Pixma IP1300
  • In the change model set the printer to IP1700.
  • In the EEPROM Operations click reset button. Turn off the printer and turn on again, the problem solved now your Canon printer becoming Canon Pixma IP 1700 again.
2. Blinking orange 5x and green 1x and the color/black cartridge not recognized
This problem appear after several times reset ink level the cartridge. If this reset methode does not work to solve the problem. I get this solution after several times try resetting using various combinations button. Solutions for the problem are:
  • Start with printer off
  • Hold down Resume button and press Power button.
  • Keep holding down Power button and press Resume 2 times, then press and hold the resume button, release power button.
  • Green lights will flash and then stop blinking (Keep hold the resume button).
  • When green lights are solid, release resume button and press again the Resume button 4 times.
  • Don’t switch of the printer (because if your trun off and turn on again the printer the problem still appear), Now reset the counter and EEPROM canon IP1700 using IPTool software (recommended).
  • Turn off and turn on again the printer, the printer should respond as normal. In my Canon IP1700 problem solved.


Read More Add your Comment 0 comments


Repair or Reset Counter Canon Pixma MP190



Repair or Reset Counter Canon Pixma MP190. This article is to answer many questions about reset method Printer Canon Pixma MP190 from this blgo readers. And I found this method but I’m not tried  this reset method, I just share this manual reset in this blog. You can try this reset method to reset waste ink counter in your Canon Pixma MP190.

Canon Pixma MP190 all-in-one is compact ans styles photo printer with printing, copying and scanning features. This printer using advance copy technology for best copying result. Price of the Canon MP190 in the market is about $40.

Waste Ink Counter Reset for Canon MP190:
  1. Turn on the printer then press Menu-Copy-Scan-Copy-Copy to enter enter into SERVICE MODE.
  2. After enter into service mode, Select TEST MODE.
  3. Select [8] PRINTER TEST in TEST MODE.
  4. Select 3. [EEPROM CLEAR].
  5. Select 0. [INK COUNT] to reset the ink counter in the printer.
  6. Press the [Set] key.
  7. Press the [Stop/Reset] key (returning to the state of 3), and then press the [ON/OFF] key
After reset manually you can use software resetter to reset the printer. The software can download from this link: Download software resetter Canon Pixma MP190


Read More Add your Comment 1 comments


Repair or reset Canon PIXMA MP240 printer



How do you repair or reset Canon PIXMA MP240 printer after refilling ink cartridges? I refilled the Canon PIXMA MP240 cartridges using a refill kit. Printer won't recognize them anymore. Hours of Googling and pressing random buttons resulted in nothing useful. Any idea if it's even possible to "convince" a Canon PIXMA MP240 printer to take refilled cartridges? If so, how?

Repair or reset Canon PIXMA MP240 printer:
  1. Disconnect the power cable to the printer.
  2. Hold down the On/Off button.
  3. Reconnect thew power cable.
  4. With the power button still down, press the Stop/Reset button twice.
  5. Release the On/Off button.
  6. The printer is now in the factory mode (wait until idle is displayed)
  7. Press the right arrow button (next to the OK button) repeatedly until Shipping Mode 3 is displayed.
  8. Press the OK button.
  9. Wait until "Without Cleaning" is displayed and then press the Stop/Reset button once.
  10. A test page should print, but if not, don't worry.
  11. Open the cover. The cartridge should position themselves at the far left-(the cartridge removal location.)
  12. Disconnect the power cable.
  13. Remove both cartridges.
  14. Close the cover.
  15. Reconnect the power cable.
  16. Press the On/Off button.
  17. Wait until a Replace Cartridges message is displayed. Now insert the cartridges.
  18. Close cover and wait until the printer is in the normal mode and displays the normal start menu (i.e. Copy)


Read More Add your Comment 0 comments


Free Canon IP1800 General Tool



To solve the problem on Canon Printer IP1800 please download Canon IP1800 General Tool for Free
Free Download Canon IP1800 General Tool


Read More Add your Comment 1 comments


Free resetter Canon IP1700



To solve the problem on Canon Printer IP1700 please download software resetter Canon IP1700 for Free
Free Download Resetter Canon IP1700

Canon IP1700 Ink waste resetter
http://www.divshare.com/download/2612818-f02

Canon IP1700 Ink waste resetter
http://www.divshare.com/download/2612818-f02


Read More Add your Comment 0 comments


Error Code Canon MP150/MP160 and How to clear E27 Code MP150/MP160



MP150/MP160
Error Code Canon MP150/MP160
E9 The connected digital camera / video camera does not support Camera
Direct Printing
E14 The Ink cartridges whose destination are wrong
E15 Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 Failed to scan head alignment sheet
E22 Carriage error
E23 Paper feed error
E24 Purge unit error
E25 ASF(cam) sensor error
E26 Internal temperature rise error
E27 Waste ink absorber full or platen waste ink absorber full

E28 Ink cartridge temperature rise error -
E29 EEPROM error
E33 Paper feed position error
E35 15 USB Host VBUD overcurrent error - USB
E37 17 Abnormal motor driver error
E40 20 Other hardware error
E42 22 Scanner error

How to clear E27 Code
  • With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button.
  • When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
  • When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a service mode. (Waiting for menu selection)
  • When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in orange and green, starting with orange.)note: press 4 times for waste ink counter reset.
The number of the Reset button pressing LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print (auto teste)
2 times Green EEPROM print (dados da EEPROM)
3 times Orange EEPROM reset (EEPROM reset)
4 times Green Waste ink counter reset (Absorvente reset)
  • Turn off the printer.( it must be turn off) then turn it on again.


Read More Add your Comment 0 comments


Repair or reset Canon printers(MP145,MP150,MP160,MP198,MX338)



If you have a Canon printer and encounter “Waste Ink Absorber is full” here’s a solution for you without going to Canon Service Center for servicing that might cost you a price of a new printer. Canon printers has a certain internal counter suggests that the ink absorber may be full, and you can DIY . I have tested all and it is working.

Here’s for Canon MP145 ,MP150 and MP160

  1. With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button.
  2. When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
  3. When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a service mode. (Waiting for menu selection)
  4. When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in orange and green, starting with orange.)note: press 4 times for waste ink counter reset.
  5. Press the Power button to save the settings.
  6. Unplug cable power. (for MP145 / MP150) or Turn Off Power. (for MP160)
  7. If it doesn’t work repeat the steps again.
The number of the Reset button pressing LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset
After manual reset, use this software to permanently remain the resets. Download


Here’s the tutorial Manual Reset for Canon MP198

  1. Start with printer OFF and usb cable disconnected from pc.
  2. Hold down STOP/RESET and then hold down POWER at the same time.
  3. Release STOP/RESET (don’t let go of the power just yet)
  4. Press RESUME twice, then release POWER and wait until the lcd panel indicates (0)
  5. Now connect your usb cable to pc and a message shows new hardware detected, just ignore it.
  6. Download the reset file here.
  7. Run the service tool, press main on Clear Ink Counter, a test print will print and press platern again.
  8. Power off and on again, now you can continue to print as normal. If it doesn’t, repeat the steps again.

Here’s for the Canon MX338
  1. Turn off the printer without pulling the power cords.
  2. Hold down STOP/RESET button and press Power button.
  3. Keep holding down Power button and let STOP/RESET button go.
  4. Then Press STOP/RESET button twice then let BOTH buttons go.
  5. You will notice that the Alternate Blinking error is gone, this means that the printer is in Service Mode state.
  6. After this is done download the resetter, extract it and double click “MX338.exe”
  7. Click Reload Button and you will get a new USB port.
  8. Load some papers in your printer and press the “Main” Button once, wait until the printing is done.
  9. Then press “EEPROM Clear” button to clear EEPROM.
  10. Then press EEPROM button and the printer will print some text.
  11. Then power off the printer(sometimes you have to press twice the power button to turn off) and turn on again.
  12. Download the resetter here.


Read More Add your Comment 0 comments


Repair or Reset Canon iP 1880



Repair or Reset Canon iP 1880
Repair or Reset Canon iP 1880
This is how to reset Canon iP 1880 :
  1. Press Resume button and hold for 1 - 2 minutes
  2. Open the cover
  3. Release the catridge and then put them on again
  4. Close The Cover
  5. Turn off the printer
  6. Turn it on again.

Or you can use IPTool software to reset,
Step 1 : Manual for service mode 
  1. Unplug power and USB.
  2. Open door and hold power button.
  3. Connect power.
  4. Close door, then release power button.
  5. Open Iptool then klik "Reset Main" Download IPTool

Download IPTool


Read More Add your Comment 0 comments


Download IPTool Canon Software Resetter



IPtool is free and portable software to reset Canon iP1200, iP1300, iP1600, iP1700, iP1800, iP2200, iP2500. This program resetter  is works with the printer Canon iP-series only. This software provides all you need to reset your canon printer such as reset ink counter, ink level, cleaning head’s cartridge, test print and more.

Attention, like other software resetter, before using the iPtool software you must reset your printer manually to prevent the program stalled when using this software to reset your printer. Manual reset for printer that supported with IPtool can be found at other post in this blog. I have tested this software to reset Canon iP1300, iP1700 and Canon iP1880 printer this software work fine.

Features IP Tool software: 
  • Showing all info on the printer such as ink level, ink counter number of cleaning, cartridge replacement and more.
  • Print test feature to test nozzle on the cartridge.
  • Cleaning and deep cleaning feature to clean head cartridge and cleaning the rollers.
  • Changing the delay value for drying.
  • Set the printer model manually.
  • Reading and reset EEPROM printer.
  • Reset counter and reset ink level on the color and black cartridges.

Ink Level – shows the level ink:
  • BK – black cartridge.
  • CY – Cyan cartridge.
  • MG – Magenta cartridge.
  • YL – Yellow cartridge.
  • WM – Waste ink counter status.
  • WP – “additional” waste ink counter status.
Port Name – displays the port where the printer installed.
Port S / N – shows the serial number of the printer port.
Power – shows the number of:
  • ON – inclusions printer.
  • OFF – to turn off the printer.
Cartridge Info – Displays information status of:
  • BK – black cartridge.
  • CL – colored cartridge.
Head Parking – displays the number of parking.
Head Cleaning – shows the number how many time the cartridge cleaned.
Head Deep Cleaning – displays the number of deep cleaning Printer cartridge.
Cartridge Replacement – shows the number of cartridge replacements:
BK – black cartridge.
CL – colored cartridge.

Download iPTool version 1.1.3


Read More Add your Comment 0 comments


 

Our Partners

© 2010 Printer Repair Experts All Rights Reserved Thesis WordPress Theme Converted into Blogger Template by Hack Tutors.info